Fuse Replacement; Mounting The Unit In A Japanese Car - Sony XAV-AX5650 Bedienungsanleitung

2
Mount the unit onto the mounting sleeve
.

Notes
• Install the HDMI cable (not supplied) before mounting the
unit onto the mounting sleeve .
• If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
• Make sure the 4 catches on the trim ring  are properly
engaged in the slots of the mounting sleeve .

Mounting the unit in a Japanese car

You may not be able to install this unit in some
Japanese cars. In such a case, consult your Sony
dealer.

Bracket
Parts supplied with
your car
When mounting this unit to the preinstalled
brackets of your car, use the mounting screws  in
the appropriate screw holes based on your car:
T for TOYOTA and N for NISSAN.
Note
To prevent a malfunction, install only with the mounting
screws .
16
GB

To the dashboard/center console
Bracket

Fuse replacement

When replacing the fuse, be sure to
use one matching the amperage
rating stated on the original fuse.
If the fuse blows, check the power
connection and replace the fuse.
If the fuse blows again after
replacement, there may be an
internal malfunction. In such a case, consult your
nearest Sony dealer.

Fuse (10 A)