Choosing The Level Of Assistance On Lcd Display; Pedestrian Assistance On Lcd Display - Wayscral ANYWAY E-200 Bedienungsanleitung

As well as the charge level, the display also shows the current consumption.
The higher this consumption, the lower the autonomy.
If the user forgets to turn off the power after 5 minutes of inactivity, the LCD will turn off to save power.
4.

Choosing the level of assistance on LCD display

When power is turned on, you can choose between 6 levels of assistance from the lowest (1) to the highest
(6). Press the "+" or "-" buttons to select one of these six levels of assistance. The chosen level is displayed
in the assistance indication area.
● If you choose a high level of assistance (5 and 6), battery usage will go up and the effort needed
on the part of the user will be lower. These levels are suitable for slopes, headwind or heavy loads.
● Average support levels (3 and 4) mean that user effort and battery usage are equal.
● The low assistance levels (1 and 2) mean that the propulsion of the bicycle comes more from the
effort of the user than from the use of the battery. These are therefore energy-saving modes. We
suggest that you use the level of assistance 1 when using the bicycle to play sports.
● Level 0 means that assistance is switched off.
5.

Pedestrian assistance on LCD display

Long press on the "-" button to use the "assisted start" function to make starting easier. When the starting
aid is used, the assistance does not exceed 6 km/h. The LCD will then show "6KM" above the speedometer.
As soon as the "-" button is released, the start aid stops.
DISPLAY
55
CHARGE LEVEL
2A
4A
6A
8A
10A
≥ 12A