Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
C.
First use and adjustments
I.
Positioning of the safety elements
1.
Lighting
Lighting is provided with the bicycle, consisting of two reflectors (one white included in the front light and
one red in the rear light), one front light, one rear light and two other orange reflectors positioned between
the spokes of the wheels.
The lighting system is an obligatory safety feature of your bicycle, as such it must be present. Check that
your lighting system works before riding.
If necessary, you can change the bulb or the batteries of your lighting.
The used batteries contain metals that are harmful for the environment. They can be deposited in our
shops for an appropriate treatment, do not throw them away with the household waste or outdoors.
Batteries should be collected separately.
Headlight with external battery
Remove the top transparent portion of the headlight by pressing on the notch located behind the case.
Once removed, you can remove both button batteries (CR2032) and replace them with the correct
polarity. Replace the transparent part. Turn the front light on / off by moving the small switch on the top
of the lamp.
Tail light with external battery
Remove the transparent part with a screwdriver. Once removed, you can remove both batteries (LR44)
and replace them with the correct polarity. Replace the transparent part. You turn the tail light on and off
by moving the small switch on the back of the lamp.
2.
Bell
A bell is situated on your handlebars. It can be heard in a range of 50 m.
The bell is an obligatory safety feature of your bicycle, as such it must be present on your handlebars.
3.
Wearing a helmet
For a safe use, wearing a bicycle helmet is strongly recommended. It reduces the risk of skull injuries in
the case of falls.
WARNING: Wearing a helmet is obligatory for children under 14 years old, whether
they are riders or passengers.
For more information, contact your distributor.
42
Werbung
Inhaltsverzeichnis
