Selecting Screen Language; No Signal - Eneo VM-FHD22PP Installationsanleitung

• Connect the AC input cable to monitor, then press the main power switch on mon-
itor. At this time the monitor will enter into standby mode and the indicator light
turn red.
• Using buttons can turn on monitor from standby mode as follows: Press POWER
keyon front panel or on the remote control.
2. Turn off monitor
• Press POWER button on front panel the or on the remote control to enter standby
mode. The indicator light is red.
• Using main power switch turns off monitor completely.

Selecting screen language

i Note: lf you use your monitor for the first time.you should select the language which
will be used for displaying menus and indications.
• Press the "MENU" button into main menu.
• Press the
• Press the button to select OSD LANGUAGE.
• Press the button toselect your language.
• When you are satisfied with your choice, press MENU to exit.

No signal

If the monitor does not receive an input signal, this character is displayed:
button toselect OSD menu.
EN
9