Assembly Instructions - Beko EFS8000WI Bedienungsanleitung

3

Assembly instructions

1. Take out the base tube, three butterfly screws for fixed base and the round base from the packing
carton;
2. Insert the tube to the round base, be sure to make the positioning screw align with the base;
3. Screw the three butterfly screws into the holes on the tube and tighten them;
4. Loosen the fastening knob, adjust the height of inner tube and tighten the knob;
5. Take out the control part of the fan from the packing carton, loosen the fastening screw at the back
of the fan, insert the inner tube into the bottom hole, make sure that the fastening screw and the
fastening knob in the same position.
Positioned fixed rope
Stand Fan / User Manual
Fig. 1
Positioned fixed gap
Fig. 3
Position logo
Fig. 2
Fig. 4
7 / 16 EN