Electrical Connection - Franke FSW 918 BK/XS Bedienungsanleitung Und Installation

ELECTRICAL CONNECTION

• Connect the hood to the mains supply.
• Open the upper panel by pressing the A-key (See Part
"USE" ) for at least 2 seconds.
• Remove the metal filters (See Part "MAINTENANCE")
and make sure that the connector piece of the supply ca-
ble is correctly inside the hood socket.
Upper exhaust flue
• Slightly widen the two sides of the upper flue and hook
them behind the brackets 7.2.1, making sure that they are
well seated.
• Secure the sides to the brackets by using the 4 screws 12c
(2,9 x 9,5) supplied.
• Make sure that the outlet of the extensions pieces is
aligned with the chimney outlets.
Lower exhaust flue
• Slightly widen the two sides of the flue and hook them
between the upper flue and the wall, making sure that
they are well seated.
• Fix the lower part laterally to the hood body by using the
2 screws 12c (2,9 x 9,5) supplied.
EN
Flue assembly
12c
2.1
2
12c
2.2
12c
2
27