Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ATTENTION: in the event of overfilling the engine oil above the allowable, safe
level on the dipstick, the excess oil can be sucked off.
i)
Connect the reinforced high-pressure hose to the outlet (A in the figure
below) on the pump housing:
j)
Connect the other end of the pressure hose to the gun (B in Fig. below), and
insert the spray lance (C in fig.) into the end of the gun - pressing it in with a
spring and then turning it until the lug on its end snaps into place:
k) Put the required nozzle on the lance by reversing the flange on the end of the
nozzle and making sure that it is securely seated after application when the
flange returns to the original connection:
Werbung
Inhaltsverzeichnis
