Kirami FinVision S Nordic misty Bedienungsanleitung Seite 62

82
The characteristics of wood and surface treatment
Wood is a natural material, and you should know the following about its characteristics. Normal-
ly, wooden materials gain a grey tint in roughly one year, depending on the amount of sunlight
(care instructions below). Sometimes resin may be exuded from knots, but it can be removed
from the knots with a steel trowel and the area treated with knotting solution. Splinters may
also come off from the wood; they should be removed immediately using a sterile needle (use
e.g. wound cleaner to disinfect it).
Outer surface of the sauna
The exterior of the sauna is made of timeless spruce panel. It completes the modern and stylish
look of the sauna. If you want to maintain this shade of black, the outside of the sauna must be
stained every few years, depending on how the sauna is used. At the factory, the sauna is treat-
ed with industrial water-based wood oil. If you want to use the original industrial wood oil to
treat the sauna again, you can order the wood oil via your retailer. Alternatively, the outer sur-
face can be treated with Pinotex Classic 5 Ebenholtz, 8802-B07G.
Benches and interior surfaces of the sauna
The interior surfaces of the sauna are made of aspen. The sauna's dim atmosphere helps you
relax both physically and mentally. Just let your thoughts flow!
If desired, the wooden surfaces of the bench can be treated with paraffin oil. The treatment of
the benches can be renewed approximately every year, depending on the use.
Note. Oiling darkens the wood surface.
Hygiene
We always recommend washing up before and after sauna bathing. Always use clean sauna bench towels to protect
the benches and maintain hygiene. A clean sauna has a fresh scent, which makes sauna bathing a pleasure.