Philips Satinelle Ice HP6496 Bedienungsanleitung Seite 15

Problem
The skin cooler
is not cold
enough.
The pivoting
cooling head of
the leg skin
cooler does
not move.
It is not
possible to
remove the
epilating head.
It is not
possible to
remove the
shaving head
(HP6496 only).
Possible cause
You did not
freeze the skin
cooler long
enough.
You dit not put
the skin
cooler in the
freezer or
freezing
compartment.
The skin cooler
did not touch
the skin.
The pivoting
cooling head is
frozen.
You did not
move the
epilating head
in the right
direction.
You did move
the shaving
head in the
right direction.
Solution
Put the skin cooler without the
insulating sleeve in the freezer or
freezing compartment (***) for at
least 4 hours. When the colour of
the fluid has changed from white
to completely blue, the skin cooler
is ready for use.
Put the skin cooler without the
insulating sleeve in the freezer or
freezing compartment (***) for at
least 4 hours. Do not store the
skin cooler in the refrigerator.
Make sure the skin cooler is always
in proper contact with your skin
during epilation.
Pass the skin cooler over your leg
a few times to make it pivot again.
Always make sure the outside of
the skin cooler is completely dry
before you freeze it.
Press the release button and move
the epilating head in the direction
of the arrow (fig. 11) to remove it.
Press the release button and move
the shaving head in the direction of
the arrow (fig. 11) to remove it.
EnglisH
15