urmet AIKO 1716/1 Bedienungsanleitung Seite 14

CODE: user code.
Set a number from 0 to 127, according to the following rules:
• In the column there must not be any apartments with the same user code.
• If there are apartment stations in parallel in the same apartment, these must have the same user code.
• The user codes of the same column must be consecutive.
§
To set the desired code, use the dip switches from 2 to 8 (2= most signifi cant bit - 8= less signifi cant
bit); the dip-switch 1 must be set to OFF.
INT: apartment internal code.
Set a number from 0 to 3, according to the following rules:
• If in the apartment there is only one station, the internal code must be set to 0.
• In apartments, up to 4 apartment stations in parallel with the same user code and different internal codes
can be connected.
The internal code identifi es each station of the same user. This means that intercom calls can be addressed
to the single internal code in the same apartment.
In case of intercom calls to different apartments, in case of calls coming from door units and in case of fl oor
call, all the user apartment stations always ring. Consider also the following information:
• after receiving a call, the internal code 0 rings immediately; the internal codes 1, 2 and 3 ring in
sequence.
• If the call comes from a video call station, the internal code 0 turns the video door phone on.
However, the other apartment stations of the same user can press the button
phone, turning off the other ('video transfer' function).
LINE TERMINATION SETTING
On the video door phone there is a jumper which allows to insert the line termination. The termination must
be activated in all the devices installed at the end of a line that does not start again with another segment
from the terminal pins LINE OUT:
LINE OUT
LINE 3
1083/55
LINE 4
LINE IN
14
Line termination
ON
OFF
LINE OUT
LINE IN
LINE 1
LINE 2
Termination
ON
Termination
ON
Termination
OFF
to turn their video door
Termination
ON
LINE OUT
LINE 3 LINE 1
1083/55
LINE 4 LINE 2
LINE IN
DS1716-001D