Operation With Tap Water Connection; Preparations For Operation; Automatic Wash - Hedson Drester ACE DG2A Bedienungsanleitung

14. OPERATION WITH TAP WATER
CONNECTION
A
Item Part
A Hose for rinse gun
B Red plug
Symbol Function
Drain (optional)
Air line
Tap water inlet
Recirculating water
To operate the unit with a tap water connection,
reroute the unit as follows:
1. Disconnect the blue 6 mm hose for the rinse
gun (A) from the T-piece and fit it to the tap
water inlet connector.
231721 rev.1 2022-12-01 231721 Rev. 1 2022-12-01
Drester ACE Drester ACE
2. Put the red plug (B) into the cross-junction to
plug the hole.
The rinse gun in the manual sink will now operate
with tap water.

15. PREPARATIONS FOR OPERATION

Always wear the appropriate protective gear when
operating the unit. Wear eye protection, protective
gloves, and a protective mask.
B

16. AUTOMATIC WASH

8
7
6
Item Part
1 Nozzle for paint channel
2 Timer button (start pre-wash)
3 Plate for trigger clip
4 Air line
5 Paint cup holder
6 Lid holder
7 Funnel
Use eye protection
Use protective gloves
Use a protective mask
9
1
2
3
4
5
13