Color Coding; Setup With Tap Water Connection - Hedson Drester ACE DG2A Bedienungsanleitung

2. Detach the plug.
3. Fit it on the air line.
Water fill-up
Fill the filtrate container up to 135 mm below its
upper edge with clean water.
135 mm

12. COLOR CODING

Hoses for solvents or water in DRESTER ACE units
are either black or white, as follows:
Hose color
White
Black
Hose marking
Hoses are marked
or AQUASOLVE.
12
Drester ACE Drester ACE
Solvent or water
Clean
Recirculating
red for solvent or blue for water
Wash area marking
Wash areas are marked by a
or a blue label for water or AQUASOLVE.

13. SETUP WITH TAP WATER CONNECTION

3
Item Part
1 Brush
2 Ball valve (OPEN position)
3 Rinse gun
Units suitable for waterborne paint can be used
with tap water if available at the site. In this case
the tap water is used for the rinse gun (3)
red label for solvent
1
2
231721 Rev. 1 2022-12-01 231721 rev.1 2022-12-01