Storage; Maintenance - Philips FC9179/01 Bedienungsanleitung

English
10
Pausing during use

storage

Maintenance

Tip: For optimal performance, always use the Philips s-bag
performance available under type number FC8027.
Always unplug the appliance before you clean the appliance, replace the
dustbag and before you replace the filters.
Note: In some cases, the dustbag-full indicator can indicate that the dustbag
is full, even though it is not. This may occur if the pores of the dustbag are
clogged (e.g. when you have vacuumed ashes, fine sand, lime, cement dust and
similar substances) or if something is blocking the nozzle, tube and/or hose.
If the pores of the dustbag are clogged, you have to replace the dustbag, even
if it is not full yet. If the dustbag is not clogged but not full either, something is
blocking the nozzle, tube and/or hose. In this case, do not replace the dustbag
but remove the obstruction.
Note: Only wipe the body of the appliance with a moist cloth.
All manuals and user guides at all-guides.com
1 If you want to pause for a moment, insert the ridge on the nozzle
into the parking slot to park the tube in a convenient position.
1 Switch off the appliance and remove the mains plug from the
wall socket.
2 Slide the tube parts into each other to reduce the tube to its
shortest length.
3 Press the cord rewind button to rewind the mains cord.
4 To store the appliance in upright position, insert the ridge on the
nozzle into the storage slot.
ultra long
®