Placing And Installation; Choosing The Right Place; Connection To Power Supply - Atag KD5088CUU Gebrauchsanweisung

instructions for use

placing and installation

choosing the right place

connection to power supply

Place the appliance in a dry and regularly ventilated
room. Allowed ambient temperature depends on the
model (class) of the appliance and is stated on the rat-
ing plate of the appliance.
Never place the appliance near heat emitting devices
(e.g. cooker, radiator, water heater and similar devices)
and do not expose it to direct sunlight.
The appliance should be positioned at least 3 cm away
from the electric or gas cooker and at least 30 cm
away from the radiator. If this is not possible, use an
appropriate insulation.
Behind the appliance there should be free space at
least 200 cm² wide and above the appliance the high
kitchen units should be at least 5 cm away from the
appliance in order to assure adequate ventilation of the
condenser unit.
Class
SN (sub-normal)
N (normal)
ST (sub-tropical
T (tropical)
Connect the appliance with the cable and plug to the
power supply socket outlet with a ground terminal
(safety socket).
Required nominal voltage and frequency are indicated
in the rating plate.
The connection to the mains supply and earthing have
to be made according to current standards and regula-
tions. The appliance resists temporary voltage toler-
ance up to -6 to +6%.
gebrauchsanweisung
Ambient temparature
from + 10°C to + 32°C
from + 16°C to + 32°C
from + 16°C to + 38°C
from + 16°C to + 43°C
57