Time Lapse - Berger & Schroter 32364 Bedienungsanleitung

Time Lapse

There are three options in the „Time Lapse" menu, as shown below.
[Normal]: The camera automatically takes pictures according to the
set time interval. For example, if you set an interval of 1 hour, the
camera takes a photo every hour. If you want to observe that a plant
is flowering, the camera takes 24 photos in 24 hours to record the
entire process of flowering.
[Time Lapse Video]: You can set the interval time. The time range
is from 3 seconds to 24 hours. For example, if you set an interval of
1 hour, the camera will take a photo every hour. If the camera is in
operation for 24 hours, 24 photos will be taken. These photos are
converted into a video.
[Off]: Closes the time lapse.
Time & date
Set the date and time in the camera. The date format: dd/mm/yyyy,
yyyy/mm/dd, mm/dd/yyyy. The time format: 24 hrs, 12 hrs. Press the
right arrow key to make the selection. Press the up and down arrow
keys to set the value. Then press OK to confirm.
Options: Time & Date Setting / Time Format / Date Format
Photo Stamp
Provide your pictures with a time stamp (date and time) or turn this
function off.
Options: Time & Date / Date / Off
18