Berger & Schroter 32364 Bedienungsanleitung Seite 17

Sensitivity Motion Sensors
Here you can set the sensitivity of the motion sensor. Select High
for indoor areas and environments with little interference. Select
Medium for outdoor areas and environments with normal interferen-
ce. And select Low for environments with high interference. (Please
note that temperature can also affect sensitivity).
The High setting is suitable for warm ambient temperatures, while
Low should be selected for cold environments.
Options: Low / Medium / High
Target Recording Time
Set the target recording time. As shown in the illustration below,
you can set the start and end time. The camera only operates in the
specified time window. During the other time, the camera remains in
standby mode.
Options: ON / OFF
Language
Select the desired language via the display.
Options: English /German /Danish /Finnish /Swedish /Spanish /
French /Italian /Dutch /Portuguese /Simplified Chinese /Japanese
Endless Capture
Set the camera to record videos in a loop. When the memory card is
full, the oldest file is replaced and recording continues as expected.
If you select [OFF], the camera stops recording when the memory
card is full.
Options: ON / OFF
17