Camera Modes; Parameter Mode; Photo Resolution - Berger & Schroter 32364 Bedienungsanleitung

Camera modes

[OFF] :OFF mode is the safe mode if any action needs to be taken
(e.g. replacing the micro SD card or batteries or transporting the
unit).
[ON]: The camera automatically takes photos or videos (with the
current settings) when the PIR sensor detects activity in the area it
is monitoring.
[TEST]: In TEST mode, you can check and change the camera's
settings using the built-in LCD screen. the built-in LCD screen.
Tips for commissioning
1. Make sure the camera is switched off before inserting or remo-
ving microSD cards or batteries.
2. If you are using an external power source, do not remove the
internal batteries.
You can connect an external 6V DC power source of at least 1.5A to
the DC connector on the bottom of the camera.
3. Photos are in jpg format and videos are in avi format.
4. When the memory card is full, the camera will stop recording un-
less the endless recording function has been activated. The oldest
file will be replaced and recording will continue as expected.
5. To remove the micro SD card, gently push the card in. Do not try
to pull it out without pushing it in first!
Parameter
[Photo]: Taking photos with motion detection.
[Video]: Capture videos with motion detection.
[Photo & Video] : Capture both photos and videos with motion de-
tection.
Options: Photo/ Video/ Photo & Video

Photo resolution

Set the image resolution.
Options: 12MP (4608x2592P) / 8MP (3840x2160MP) / 5MP
(3072x1728P) / 3MP (2304x1296P) / 2MP (1920x1080P) / 1MP
(1280x720P)
Mode
15