Madeira 10604863 Bedienungsanleitung Seite 45

Mounting the wheels
1
Insert the wheel axle to the
wheel mount on the frame.
3
Mount the wheels 5 onto the re-
spective ends of the wheel axle.
Air flow
1
Tilt the ventilator to adjust
the air flow upwards or down-
wards. Fix the position by tigh-
tening the fixing screws 6 firm-
ly.
Speed
1
Set the required speed by tur-
ning the switch on the control
1 on the backside of the venti-
lator.
Transport
1
Pick up the ventilator by the
handles 7 only.
88 EN
2
Fix the wheel axle by sticking
four of the split pins through
the respective holes in the axle.
4
Secure the wheels 5 with the
two remaining split pins. Make
sure the ends of all six split pins
are bent apart.
2
Insert the power supply cord 4
into a suitable wall socket. For
Switzerland, only use the venti-
lator 10604864.
2
To switch off the ventilator, turn
the switch on the control 1 to
OFF.
Storage
2
After use pull the supply cord 4
out of the wall socket and wind
the cable onto the holder on the
backside.
1 1
3 3
1 1
1 1
1 1
2 2
4 4
2x 2x
2 2
2 2
2 2
EN 89