Gewiss Chorus GW 10 753 Bedienungsanleitung Seite 18

CURTAIN AND ROLLER SHUTTERS MANAGEMENT
With this function motorised curtains or roller shutters connected to a KNX actuator can be moved.
The movement of each single curtain or roller shutters can be controlled with two completely
separate channels or with just one channel. The indicator LED is always off.
Method with two channels:
• extended pressure on the push-button (> 0.5s): the roller shutter moves (up or down
depending on push-button configuration);
• brief pressure on the push-button ( 0.5s): Stop, if the roller shutter is moving; adjusting the
slats if the roller shutter is still and only if the actuator is in the "Venetian" configuration.
Method with one channel:
• extended pressure on the push-button (> 0.5s): the roller shutter moves (in the direction
opposite that of the last movement);
• brief pressure on the push-button ( 0.5s): Stop, if the blind is moving; adjusting the slats if
the roller shutter is still and only if the actuator is in the "Venetian" configuration.
DIMMER MANAGEMENT
It allows you to control lighting devices connected to a KNX dimmer. The operation of each
single dimmer channel can be controlled with two completely separate channels, or with just
one channel. The status of the controlled dimmer channel is signalled by the LED (amber/green)
selected, according to the indications given in the INDICATOR LIGHT paragraph.
Method with two channels:
• extended pressure on the push-button (> 0.5s): adjusting luminosity (brighter or dimmer
depending on push-button configuration);
• brief pressure on the push-button ( 0.5s): turning on or completely off (depending on push-button configuration).
Method with one channel:
• extended pressure on the push-button (> 0.5s): adjusting luminosity (opposite to the last
adjustment);
• brief pressure on the push-button ( 0.5s): turning on or off completely depending on whether
the dimmer channel is off or on respectively.
SCENE MANAGEMENT
This allows you to activate a scene (brief pressure on the push-button ( 3s), or memorise the
new values of a scene (extended pressure on the push-button (> 3s). In this mode the
localisation LED blinks briefly if a scene learning command is being sent. Only one scene can
be associated with each input.
GENERAL DESCRIPTION
18