Cleaning The Trimmer - Philips RQ1200 SERIES Bedienungsanleitung

10 Insert the lug of the shaving unit into the slot in the top of the shaver
(1). Then press the shaving unit downwards (2) to attach it to the
shaver ('click').

cleaning the trimmer

Clean the trimmer every time you have used it.
1 Slide the trimmer slide forwards to slide out the trimmer.
2 Rinse the trimmer under a hot tap for some time.
3 Slide the trimmer slide backwards to retract the trimmer.
Tip: For optimal trimmer performance, lubricate the trimmer teeth with a drop
of sewing machine oil every six months.
Replacement
For maximum shaving performance, we advise you to replace the shaving
unit every 12 months.
Only replace the shaving unit with an original RQ12 Philips Shaving unit.
1 The shaving unit symbol flashes (all types) and you hear a beep
(RQ129x/RQ128x only) when you switch off the shaver .
MINUTES LEFT
Note: The displays of the different types look different, but show the same
symbol.
2 Pull the old shaving unit straight off the shaver.
Note: Do not twist the shaving unit while you pull it off the shaver.
3 Insert the lug of the new RQ12 shaving unit into the slot in the top
of the shaver (1). Then press down the shaving unit (2) to attach it to
the shaver ('click').
4 RQ128x/RQ127x/RQ126x/RQ125x: To reset the shaver, press and
hold the on/off button for approx. 10 seconds.
Note: If you do not reset the shaver at the first replacement reminder, it
continues to beep (specific types only) and show the shaving unit symbol at 8
more shaves (specific types only) or until you reset the shaver (specific types
only).
Note for RQ129x: You do not need to reset the shaver. After 3 shaves,
the replacement reminder (flashing shaving unit symbol and beeping) is
deactivated automatically.
English
17