Remaining Battery Capacity; Travel Lock - Philips RQ1100 SERIES Bedienungsanleitung

English
8

Remaining battery capacity

RQ1180
- The remaining battery capacity is indicated by the number of charging
lights that are on.

travel lock

You can lock the shaver when you are going to travel. The travel lock
prevents the shaver from being switched on by accident.
activating the travel lock
1 Press the on/off button for 3 seconds to enter the travel lock mode.
, The lock symbol lights up on the display.
Note: The displays of the various shaver types look different, but show the
same symbol.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
The motor starts running to indicate that the travel lock has been
,
deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-in charger or Jet Clean System,
the travel lock is automatically deactivated.
Replace shaving head holder
Note: The displays of the various shaver types look different, but show the
same symbol.
For maximum shaving performance, we advise you to replace the shaving
head holder every 12 months.
- To remind you to replace the shaving head holder, the appliance is
equipped with a replacement reminder which is activated automatically
after approx. 12 months. The replacement reminder is repeated at
9 successive shaves or until you reset the shaver.
charging
Charging takes approx. 1 hour.
RQ1180/RQ1160: A fully charged shaver has a shaving time of up to
50 minutes or 15 days.
RQ1150: A fully charged shaver has a shaving time of up to 40 minutes or
12 days.
Charge the shaver before you use it for the first time and when the display
indicates that the battery is almost empty (see section 'Battery low' in
chapter 'The display').