Transport And Packaging; Appliance Equipment; Installation - BOMANN EBO 7908 IX Bedienungsanleitung, Garantie

Transport and packaging

Transport the appliance
If possible, transport the appliance in a vertical posi-
tion. Secure the appliance sufficiently and protect it
against weather during transport.
Unpacking the appliance
• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler
and cardboard packaging.
Dispose of packaging materials that are no longer
required in accordance with the locally applicable
regulations.
• To prevent hazards, check the appliance for any
transport damage.
• In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
"Cleaning and maintenance"
according to chapter

Appliance equipment

Appliance overview
1 Recessed grips
2 Control panel
3 Appliance door
4 Oven with accessories
Delivery scope
1x standard oven tray
4x mounting screws
The built-in oven is designed for installation in stand-
ard kitchen units. It can be installed both in a tall cab-
inet and under a worktop.
WARNING:
The installation and the connection to the main power
.
may only be performed by an authorized specialist.
CAUTION:
• The worktop, the cabinet, veneers, plastic coat-
ings, used adhesives etc. must be sufficient heat-
resistant (min. 100°C).
• To ensure a sufficient cooling air supply, no heat
protection strips may be installed.
• If there is a drawer below the furnace or it is at-
tached, an intermediate shelf is required.
NOTE: Recommendation!
• When installing, ask another person to assist.
• Wear protective gloves to avoid injuries at possi-
ble sharp edges.
• When inserting, use the recessed grips on the
side of the housing to lift the unit. Caution! Do not
carry or hold the appliance by the door handle.
21
1x grill grid
Incl. connecting cable
220-240 V∼

Installation