Transport And Packaging; Appliance Equipment; Installation - BOMANN EBO 7905 IX Bedienungsanleitung, Garantie

Transport and Packaging

Transport the appliance
If possible, transport the appliance in a vertical posi-
tion. Secure the appliance sufficiently and protect it
against weather during transport.
Unpacking the appliance
 Remove the appliance from its packaging.
 Remove all packaging material, such as foils, filler
and cardboard packaging.
The packaging materials are environmentally
friendly and recyclable. Dispose of packaging ma-
terials that are no longer required in accordance
with the locally applicable regulations.
 To prevent hazards, check the appliance for any
transport damage.
 In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
"Cleaning and Maintenance"
according to chapter

Appliance Equipment

Appliance Overview
1 Control panel
2 Lighting
3 Grill grid
Delivery scope
1x standard oven tray
2x mounting screws
The built-in oven is designed for installation in stand-
ard kitchen units. It can be installed both in a tall cab-
inet and under a worktop.
.
WARNING:
The installation and the connection to the main power
may only be performed by an authorized specialist.
CAUTION:
 The worktop, the cabinet, veneers, plastic coat-
ings, used adhesives etc. must be sufficient heat-
resistant (min. 100°C).
 To ensure a sufficient cooling air supply, no heat
protection strips may be installed.
 If there is a drawer below the furnace or it is at-
tached, an intermediate shelf is required.
NOTE: Recommendation!
 When installing, ask another person to assist.
 Wear protective gloves to avoid injuries at possi-
ble sharp edges.
21
4 Standard oven tray
5 Unit door
6 Door handle
1x grill grid
Incl. connecting cable
220-240 V∼

Installation