Inhaltsverzeichnis
Werbung
Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse Hold"
If you are not going to unload your clothes immediately after the programme ends, you can use the Rinse
Hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled
when there is no water in the machine.
This function holds the laundry in the final rinsing water.
If you want to spin your laundry after the Rinse Hold function:
- Adjust the Spin Speed.
- Press Start/Pause/Cancel. Programme will resume. The machine will drain the water and spin the clothes.
If you want to drain the water at the end of the programme without spinning, you can use the No Spin
function.
C
No change can be made in programmes where spin speed is not allowed.
If the washing steps permit, you can change the spin speed after the washing cycle has started. If they don't
permit it, you can't do it.
Rinse hold
If you are not going to unload your clothes immediately after the programme ends, you can use rinse hold
function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there
is no water in the machine. Press Start/Pause button after this process if you want to drain the water without
spinning your laundry. Programme will resume where it left off, drain the water and then it will be complete.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start/Pause button.
Programme will resume. Water will be drained, laundry will be spun and the programme will end.
4.3.8 Auxiliary function selection
Select the desired auxiliary functions before starting the programme. When a programme is selected, symbols
of the auxiliary functions selected with it will turn on.
C
If you press the key for an auxiliary function that cannot be selected with the current programme, you will hear a warning
from the washing machine.
Also, symbols of the auxiliary functions selected for the running programme will remain on after the washing
cycle has started.
C
Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before
starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain
active. For example, if you want to select Quick Wash after selecting Extra Water, the Extra Water option will be cancelled but
Quick Wash will remain valid.
An auxiliary function which is not compatible with the programme cannot be selected. (See "Programme and consumption table")
Some programmes have auxiliary functions that must be operated with the selected programme. This function cannot be
cancelled. The frame of the auxiliary function will not be illuminated, only inner area will be illuminated.
4.3.8.1. Auxiliary functions
• Fast+
You can press the Quick Wash button to shorten the programme time after selecting the programme. For
some programmes, the time can be shortened by over 50%. However, the changed algorithm provides good
washing performance.
Although it depends on the programme, pressing the Quick Wash button once will shorten the programme
time down to a certain level. Press the same button for the second time to drop the time to the minimum level.
For better washing results, do not use the Quick Wash button for heavily soiled laundry.
For medium and lightly soiled laundry, use the Quick Wash button to shorten the programme time.
20 / EN
-
-
-
-
-
-
and "No Spin"
options appear on the display.
Washing Machine / User's Manual
Werbung
Inhaltsverzeichnis
