Inhaltsverzeichnis
Werbung
•
If you are adding an appliance for the first time, tap "Add/Remove Appliance" on the HomeWhiz App.
Then tap "Tap here to setup new appliance". Follow the steps below as well as the instructions on the
HomeWhiz App to complete the setup.
•
To start the setup process, make sure that your machine is switched off. Press and hold the Temperature
button and the Remote Control Function button simultaneously for 3 seconds to switch your machine to
HomeWhiz setup mode.
While the device is in HomeWhiz setup mode, you will see an animation on the display, and the Bluetooth
•
icon will flash until the machine is paired with your smart device. In this mode, only the programme button is
enabled. Other buttons are disabled.
•
On the screen of the app, select the desired washing machine and tap Next.
•
Follow on-screen instructions until the HomeWhiz app asks you about the product you wish to connect to
your smart device.
•
Return to the HomeWhiz app and wait until the setup is complete. Once the setup is complete, give your
washing machine a name and confirm. You can now tap the screen to see the product you have added to the
HomeWhiz App.
C
If you cannot complete the setup successfully in 5 minutes, the washing machine will switch off automatically. In this case,
you will have to start over the setup procedure. If the problem persists, please contact the Authorised Service Agent.
You can use your washing machine with more than one smart device. To do this, download the HomeWhiz app on the other smart
device as well. After launching the app, you will need to sign in to your account you have previously created and paired with your
washing machine. Otherwise, please read "Setting up a washing machine that is connected to someone else's account".
C
4.3.15.2 Setting up a washing machine that is connected to someone else's account
If the washing machine you want to use has previously been registered in the system with someone else's
account, you need to establish a new connection between the HomeWhiz App and the product.
•
Download the HomeWhiz App on the new smart device you want to use.
•
Create a new account and log in to this account on the HomeWhiz app.
•
Follow the steps in the HomeWhiz Setup (4.3.15.1 HomeWhiz Setup) to complete the setup.
C
Since the HomeWhiz and Remote Control functions of your product work through pairing via Bluetooth, the product can be
run by only one HomeWhiz app at a time.
26 / EN
The HomeWhiz application may ask you to enter the product number stated on the label of
the product. Product label is found on the inner side of the product door. Product number is
written on this label.
Washing Machine / User's Manual
Werbung
Inhaltsverzeichnis
