Inhaltsverzeichnis
Werbung
4.3.15.3 Using the Remote Control function
After HomeWhiz setup, Bluetooth will turn on automatically. To enable or disable the Bluetooth connection,
please see 4.3.8.2 Bluetooth 3'''.
If you switch your machine off and on while Bluetooth is enabled, it will reconnect automatically. If the paired
device goes out of the range, the Bluetooth connection will turn off automatically. For this reason, you will need
to turn on Bluetooth again if you want to use the Remote Control function.
You can check the Bluetooth symbol on the display to follow the connection status. If the symbol is on, this
means that the Bluetooth connection is established. If the symbol is established, the product is trying to
connect. If the symbol is off, this means that you have no connection.
A
WARNING:
If the Remote Control function cannot be selected, check the connection status. If the connection fails, repeat the initial set-
up settings on the appliance.
WARNING:
independently of the operating mode. If you want to open the door of the product, you will need to turn the programme
selection knob or press the remote control key to deactivate the remote control function.
If you want to control your washing machine remotely, enable the Remote Control function by pressing the
Remote Control button while the programme knob is in the Programme Download/Remote Control position on
the control panel. Once the product is accessed, you will see a screen similar to the one below.
When Remote Control is enabled, you can only manage and switch off the machine and follow status on the
washing machine. All functions except child lock can be managed through the application.
You can check the function indicator on the button to follow whether the Remote Control function is On or Off.
If the Remote Control function is Off, all the operations are handled on the washing machine and only status
follow-up is allowed on the application.
If the Remote Control function cannot be enabled, you will hear a warning after pressing the button. This might
occur if the product is switched on or if there is no product paired through Bluetooth. Bluetooth setting being
Off or the washing machine's door being open are examples for such cases.
When you enable this function on the washing machine, said function will remain on except for certain cases,
allowing you to control your washing machine remotely via Bluetooth.
In certain cases, it deactivates itself for safety reasons:
•
When your washing machine undergoes a power interruption.
•
When the programme knob is turned to select a different programme or when the product is switched
off.
4.3.15.4 Troubleshooting
Follow the steps below if you are having problem with controlling or connection. Observe whether the problem
persists or not after the action you have performed. Do the following if the problem is not resolved.
•
Check whether your smart device is connected to the relevant home network.
•
Restart the product application.
•
Turn Bluetooth off and on through the user control panel.
•
If the connection cannot be established with the above processes, repeat the initial set-up settings on the
washing machine.
If the problem persists, consult an Authorised Service Agent.
Washing Machine / User's Manual
If the Bluetooth connection is enabled on your product, you can select the Remote Control function.
For safety reasons, the product's door will remain locked while the Remote Control function is enabled,
27 / EN
Werbung
Inhaltsverzeichnis
