Auxiliary Function Selection - Beko WTV 7724 XSS Bedienungsanleitung

Rinse hold
If you are not going to unload your clothes
immediately after the programme ends, you
can use rinse hold function to keep your
laundry in the final rinsing water in order to
prevent them from getting wrinkled when
there is no water in the machine. Press Start/
Pause button after this process if you want to
drain the water without spinning your laundry.
Programme will resume where it left off, drain
the water and then it will be complete.
If you want to spin the laundry held in water,
adjust the Spin Speed and press Start/Pause
button. Programme will resume. Water will
be drained, laundry will be spun and the
programme will end.
C
INFORMATION
• If the programme has not reached the spin
step, you can change the spin speed without
switching the machine to Pause mode.

4.3.10 Auxiliary function selection

Select the desired auxiliary functions before
starting the programme. You can also select
or cancel auxiliary functions suitable for the
running programme without pressing the Start/
Pause button while the machine is operating.
To do this, the machine must be in a step
before the auxiliary function you are going to
select or cancel. If the auxiliary function cannot
be selected or canceled, light of the relevant
function will flash 3 times to warn the user.
C
INFORMATION
• If a second auxiliary function conflicting
with the first one is selected before starting
the machine, the function selected first
will be canceled and the second auxiliary
function selection will remain active.
• An auxiliary function which is not compatible
with the programme cannot be selected.
(See "Programme and consumption table")
• Auxiliary Function buttons may vary
according to the model of the machine.
4.3.10.1 Auxiliary functions
Voorwas ( Prewash)
•
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save
energy, water, detergent and time.
16 / EN
C
INFORMATION
• Prewash without detergent is
recommended for tulle and curtains.
• Fast+
When this function is selected, durations of
relevant programmes get shorter by 50%.
Thanks to the optimised washing steps,
high mechanic activity and optimum water
consumption, high washing performance is
achieved in spite of the reduced duration.
• Extra Spoelen (Extra Rinse)
This function enables the machine to carry
out another rinsing cycle in addition to the
one carried out after the main wash. Thus, the
risk for sensitive skins (babies, allergic skins,
etc.) to be effected by the minimal detergent
remnants on the laundry can be reduced.
4.3.10.2 Functions/Programmes
Selected by Pressing the Function
Buttons for 3 Seconds
• Drum Cleaning+
To select this programme, press and hold the
auxiliary function button 1 for 3 seconds.
Use it regularly (every 1-2 months) to clean
the drum and ensure the required hygiene is
provided. Run the programme while the machine
is totally empty. To obtain better results, put
powder lime-scale remover for washing machines
into the detergent compartment no. "2". When
the programme is over, leave the loading door
ajar so that the inside of the machine gets dry.
C
INFORMATION
• This is not a washing programme.
It is a maintenance programme.
• Do not run this programme when there are
any objects in the machine. If you try to do
so, the machine will automatically detect that
there is load inside and abort the programme.
Washing Machine / User Manual