Product Description - AFRISO RT 10 D 230 Installations- Und Gebrauchsanweisungen

INSTALLATION AND OPERATING INSTRUCTIONS
Lindenstraße 20,
74363 Güglingen
www.afriso.com
CAUTION!
You may only use the product if you have fully read and understood these operating instructions.
DANGER
Do not make any modifications to the product.
Verify that the product is not exposed to water.
Work on electrical circuits may only be performed by trained, qualified electricians.
Mains voltage (AC 230 V) can cause serious injury or death.
Disconnect the mains voltage supply before performing the work and ensure that it cannot be
switched on.

PRODUCT DESCRIPTION

Each room thermostat RT 10 measures the actual ambient temperature on an ongoing basis and compares the refe-
rence temperature to the actual temperature and switches the output to obtain the required reference temperature.
In addition to the reference temperature, you can store timer programs (for example, Day/Night). The display shows
various values (for example, temperature, time, heating mode).
An additional NTC temperature probe can be connected to the RT 10 room thermostat (not included in scope of
delivery) which can be used as a floor temperature sensor or as an alternative room temperature sensor, depending
on the configuration.
MOUNTING
a
The mounting site of the RT 10 room thermostat must provide protection from the weather. Room thermostat RT 10
is designed for wall mounting in a standard Ø60 mm electrical box. The room thermostat RT 10 must be mounted
at eye level, at least 30 cm away from doors and windows. The room thermostat RT 10 is fixed by means of the
fixing holes on the back of the housing.
Telephone +49 7135 102-0
Service +49 7135102-211
Telefax +49 7135102-147
info@afriso.de
a
b
b
953.000.0174 VERSION: 04.2023.0
Room thermostat RT 10 D 230
a
a
b
1