(e.g. alcohol) and allow them to dry completely before reassembly.
Reinsert the shaving heads into the shaving unit and close the shaving unit
again.
Add a drop of sewing machine oil on each shaving head and switch on the ap-
pliance for about 10 seconds. In this way, you will reduce the wear on the shav-
ing heads.
Remove any excess oil from the surface with a soft cloth or a little kitchen paper.
9. Replacing the shaving heads
Replace the shaving heads every two years to ensure a consistent shaving result.
Switch off the appliance, pull the plug from the socket and the connector plug
from the appliance (if applicable).
Remove the shaving heads as described in the section "Bi-monthly cleaning" and
replace them with new shaving heads.
Contact our Customer Service to order suitable replacement parts.
DE
FR
NL
EN
133 of 144