Dry Cleaning; Replacing The Shaving Foil And Cutter Blocks - Medion MD 16623 Bedienungsanleitung

8.1. Dry cleaning

 Switch off the appliance, pull the mains adapter from the socket and
the connector plug from the appliance (if applicable).
 Press the release buttons and remove the shaving foil. Clean it inside
and out with the supplied cleaning brush.
 Then clean the cutter blocks using the supplied cleaning brush.
 Place the shaving foil gently back onto the appliance until it clicks
audibly into place.

9. Replacing the shaving foil and cutter blocks

In the event of daily use, replace the shaving foil and cutter blocks every year to
ensure a consistent shaving result.
PLEASE NOTE!
Contact our Customer Service to order suitable replacement parts.
DE
FR
NL
EN
123 of 134