Replacing The Shaving Heads - Medion micromaxx MD 14367 Bedienungsanleitung

degreasing liquid for a few minutes (e.g.
alcohol) and allow them to dry completely
before reassembly.
 Insert the shaving heads back into the shaving
unit; ensure that the notch on the guard is
aligned with the lug in the shaving unit.
 Place the shaving unit back onto the appliance.
 Add a drop of sewing
machine oil on each
shaving head and switch
on the appliance for about
10 seconds. In this way,
you will reduce the wear
on the shaving heads.
 Remove any excess oil from the surface with a
soft cloth or a little kitchen paper.
8. Replacing the shaving
heads
Replace the shaving heads every two years to en-
sure a consistent shaving result.
 Switch off the appliance, pull the plug from
the socket and the connector plug from the
appliance (if applicable).
 Remove the shaving heads as described in the
section "Bi-monthly cleaning" and replace them
with new shaving heads.
 Fit the shaving unit back into the appliance.
 Press the shaving unit gently onto the
DE
FR
NL
EN
121 of 134