Replacing The Filters - Black & Decker SVA420B Bedienungsanleitung

Note: Ensure that appropriate fixings for the type of wall
surface are used.
Place the appliance into the charging base (9) as shown in
u
figure H .
Plug the charger (10) into the charging base (9)
u
Plug the charger (10) into an electrical outlet.
u
Switch the electrical outlet on. The LED charging indicator
u
(14) will Illuminate (Fig. I).
Cleaning the filters (Fig. J, K,L )
Press the dust bowl release button (2) and lift out the dust
u
bowl (3) (Fig.J)
Lift the filter assembly (15) from the dust bowl (3) (Fig.K).
u
Empty the dust bowl by lightly shaking over a dustbin.
u
The filter (16) can now be removed from the pre filter (15)
u
by rotating anti clockwise figure L.
Tap to empty excess dust and detritus from the filter, pre
u
filter and dust-bowl figure L1.
Rinse out the dust-bowl with warm soapy water figure L1.
u
Wash the filters with warm soapy water figure L1.
u
Make sure the filters and dust-bowl are dry.
u
Refit the filters into the appliance.
u
Close the dust-bowl. Make sure the release latch (2)
u
clicks into place.
From time to time wipe the appliance with a damp cloth.
Do not use any abrasive or solvent-based cleaner. Do not
immerse the appliance in water.
Removing and cleaning the beater bar (Fig. M)
Pinch and lift the plastic tab on the pivoting clip (17) away
u
from the floor head.
Lift the beater bar (18) out of the floor head.
u
Ensure the beater bar and pivoting clip are replaced
u
before using the vacuum.
Maintenance
Your BLACK+DECKER cordless appliance has been designed
to operate over a long period of time with a minimum of main-
tenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
Run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
(Original instructions)

Replacing the filters

The filters should be replaced every 6 to 9 months and when-
ever worn or damaged. Replacement filters are available from
your BLACK+DECKER dealer (cat. no: SVF11).
Remove the old filters as described above.
u
Fit the new filters as described above.
u
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical Data
Voltage
Watt hours
Weight
Charger
Input Voltage (V )
ac
Output Voltage (V)
Current (mA)
Approx charge time (h)
Guarantee
Black & Decker is confident of the quality of its products and
offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with Black&Decker Terms and Conditions and you will need to
submit proof of purchase to the seller or an authorised repair
agent. Terms and conditions of the Black&Decker 2 year guar-
antee and the location of your nearest authorised repair agent
can be obtained on the Internet at www.2helpU.com, or
by contacting your local Black & Decker office at the address
indicated in this manual.
Please visit our website www.blackanddecker.co.uk to register
your new BLACK+DECKER product and receive updates on
new products and special offers.
ENGLISH
SVA420B
14.4V
28.8Wh
2Kg
J0D-S-180050GS
100-240
18
500
4
9