Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety regulations
Keep this information safely.
These safety regulations contain basic hints to be respected upon installation, use and
maintenance.
1. General Hints
1.1
Use the drinker only for the purpose described within the instructions for use.
1.2
The drinker may only be connected to an electric installation set up as prescribed.
Faulty electric installations can cause an electric shock or short circuit.
For a best possible protection of human beings, animals or facilities a fault current
protector switch (30 mA) is strictly stipulated.
Pay attention to the relevant regulations of your country.
1.3
The heating cable SB 112 H / 24 Volt may only be operated with a safety low voltage
transformer with max. 24 V.
1.4
The heating cable SB 112 H / 230 Volt will be connected directly to the mains supply (e.g.
junction box). Alternatively, a commercially available safety plug can be connected to the
cable ends. A grounding of the cable is not allowed as it concerns a product of protection
class II (double insulated, no earth conductor available).
1.5
Maintenance and cleaning works may only be executed when the electric installation is
switched off.
1.6
Keep children and frail persons away from the installation.
1.7
Never use the heating cable near explosive materials, objects or gases.
1.8
In case of frost protection the thermostat provided for this purpose switches on at +5°C.
A relatively large switching hysteresis ensures the heating of the entire pipe area.
Only when exceeding +15°C the energy supply of the thermostat will be interrupted
again. At the same time this hysteresis reduces the switching frequency in order to
ensure a long, undisturbed operating period of the thermostat.
2. Usage in accordance with the regulations
2.1
Designated use
The drinking bowl is exclusively designed for the purpose of watering animals.
Other applications are explicitly prohibited.
2.2
Technical Data
Type designation:
Connection voltage:
Performance:
Protection class:
Width:
Depth:
Distance of fixation holes:
Connection:
Weight:
Instructions for use:
SB 112 H/230 RBH Bacto Protect
SB 112 H/24 RBH Bacto Protect
see type plate
see type plate
II (double insulated)
240 mm
340 mm (projection from the wall)
100 (180) x 100
R 1/2" (inner thread)
ca. 1,2 kg
Werbung
Inhaltsverzeichnis
