i.safe MOBILE IS540.2 Schnellstartanleitung Seite 7

CHARGING
Only charge the device outside of explosion hazardous areas.
Only charge the device using the USB-C Cable supplied or other charging equipment
approved by i.safe MOBILE GmbH.
Do not charge the device in the vicinity of flammable substances.
Only charge the device at ambient temperatures between 0 °C to +45 °C (+32 °F to +113 °F).
Charge the device under dry indoor conditions only.
Do not charge the device in environments dusty or humid.
Connect the adapter suitable for your country to the power supply unit.
Connect the USB-C Cable to the power supply unit.
Connect the USB-C Cable to the USB interface of the device.
CONNECTING APPROVED ACCESSORIES
Only connect accessories approved by i.safe MOBILE GmbH to the device. Accessories
approved by i.safe MOBILE GmbH can be found at www.isafe-mobile.com/en/products
Connect approved accessories to the 16-pin ISM interface of the device only outside of
explosion hazardous areas.
Never open the cover of the 16-pin ISM interface in explosion hazardous areas.
Operate approved accessories in explosion hazardous areas only on the 16-pin ISM interface
of the device. Wired connections via the USB interface are prohibited.
Connect the plug of the accessory securely to the 16-pin ISM interface of the device and
check that the plug is seated correctly and securely before entering explosion hazardous
areas.
Only remove approved accessories from the 16-pin ISM interface outside of explosion
hazardous areas.
Close the 16-pin ISM interface with the cover provided when you are not using accessories.
Only use USB interface outside of explosion hazardous areas.
Never open the cover of the USB interface in explosion hazardous areas.
Approved accessories can be connected to any 16-pin ISM interface and to the USB interface.
Loosen the screw on the 16-pin ISM interface cover using the Screwdriver included in the
approved accessory package. Remove the cover as shown.
EN
7