Qlima P 628 black Gebrauchsanweisung Seite 67

man_P2xx_PH6xx-EU ('22) V3.indd 67 man_P2xx_PH6xx-EU ('22) V3.indd 67
- The socket is for AC use.
- Do not share one socket with other appliances.
- Power supply is AC220--240V 50Hz
2. Cooling operation
- Press the "Mode" button till the "Cool" icon appears.
- Press the " DOWN "or" UP "button to select a desired room temperature. (16°C-
31 °C )
- Press the " WIND " button to select wind speed.
3. Dehumidifying operation
Press the "Mode" button till the "Dehumidify" icon appears .
- Automatically set the selected temperature to current room temperature minus
2 °C . (16 °C -31 °C)
- Automatically set the fan motor to LOW wind speed.
4. Fan operation
- Press the "Mode" button till the "Fan" icon appears.
- Press the " WIND " button to select wind speed.
5. Heating operation (this function is not available for a cold-single unit)
- Press the "Mode" button till the "Heat" icon appears.
- Press the " DOWN "or" UP " button to select a desired room temperature.
(16 °C -31 °C )
- Press the " WIND " button to select wind speed.
6. Timer operation
Timer ON setting:
- When the air-conditioner is OFF, press the "Timer" button and select a desired
ON time through the temperature and time setting buttons.
- "Preset ON Time" is displayed on the operation panel.
- ON time can be regulated at any time in 0-24 hours.
Timer OFF setting
- When the air-conditioner ON, press "Timer" button and select a desired OFF
time through the temperature and time setting buttons.
- "Preset OFF Time" is displayed on the operation panel.
- OFF time can be regulated at any time in 0-24 hours.
7. SWING(air flow)
After machine turns on, press this key, the louver will swing continuously left and
right; by pressing this button again the movement will stop and the louver remain
in that position.
8.SLEEP CONTROL FUNCTION
- While in cooling mode, press the SLEEP key to set the temperature. It increases
1 °C af+B7ter an hour and at most increases 2 °C after 2 hours.
- While in heating mode, press the SLEEP key to set the temperature. It decreases
1 °C after an hour and at most decreases 2 °C after 2 hours.
- Press the SLEEP key again can cancel the setting.
4
67
20-12-2022 16:00 20-12-2022 16:00