AEG I64AV423FB Benutzerinformation Seite 58

Refer to "Technical data" chapter.
To activate the function for a cooking
zone: touch .
To deactivate the function: change the heat
setting.
6.9 SenseBoil®
The function automatically adjusts the
temperature of water so that it does not boil
over once it reaches the boiling point.
If there is any residual heat (
) on the cooking zone you want to
use, an acoustic signal is emitted and the
function does not start.
1. Touch to activate the hob.
2. Touch to activate the function.
A blinking appears for cooking zones
on which you can presently use the
function.
3. Touch the control bar of any available
cooking zone for which you want to start
the function (between the heat setting
1-14).
The function starts.
If you do not choose any cooking zone within
5 seconds the function does not activate.
Once the function starts the indicators
above the symbol come on one after
another until the water reaches the
boiling point.
When the function detects the boiling point
the hob emits an acoustic signal and the heat
level automatically changes to 8.
If all cooking zones are already in use or
there is some residual heat on all of
them, the hob emits a beep sound, the
indicators above
function does not start.
58 ENGLISH
comes on.
/ /
blink and the
To deactivate the function touch
function deactivates and the heat setting
goes down to 0) or touch the control bar and
adjust the heat setting manually.
6.10 Timer
• Count Down Timer
You can use this function to set the length of
a single cooking session.
First set the heat setting for the cooking zone,
then set the function.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch
timer to set the time (00 - 99 minutes). When
the indicator of the cooking zone starts to
flash, the time counts down.
To see the remaining time: touch
the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To change the time: touch
cooking zone. Touch
To deactivate the function: touch
the cooking zone and then touch
remaining time counts down to 00. The
indicator of the cooking zone disappears.
When the countdown ends, an acoustic
signal sounds and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
• CountUp Timer
You can use this function to monitor how long
the cooking zone operates.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch
timer. appears. When the indicator of the
cooking zone starts to flash, the time counts
(the
of the
to set
to set the
or .
to set
. The
.
of the