Voice Command Parameters Configuration - urmet VOG 7 1760/31 Benutzeranleitung

• Press the Touchless Actions parameter, a pop-up screen is displayed.
• Select Voice Commands to enable the mode on the video door phone.
2.1

VOICE COMMAND PARAMETERS CONFIGURATION

The following parameter allows setting the configuration parameters of voice commands.
• Press Voice Commands to configure the voice command parameters.
• The screen with the various settings and parameters of the usage mode is displayed.
– Configure "At Home" mode: allows automatic configuration of the Presence Status parameter
(At Home, Recording, Divert, Remote) of the video door phone and enables a Yokis activation
when the voice command "I'm back" is executed.
– Configure "Away" mode: allows automatic configuration of the Presence Status parameter (At
Home, Recording, Divert, Remote) of the video door phone and enables a Yokis activation when
the voice command "I'm going out" is executed.
– Require gesture confirmation for door/gate opening: if enabled, it allows requesting a gesture
confirmation after using the voice command to open the pedestrian door or the driveway gate.
– Voice Commands feedback: allows selecting the type of feedback that is provided by the video
door phone after executing a voice command.
– Verbose (speech): the video door phone plays phrases as acoustic feedback to the voice
command executed.
– Quick (tones): the video door phone plays ring tones as acoustic feedback to the voice command
executed.
20
DS1760-037