Sony VPL-FH60 Kurzreferenz Seite 47

Indicator status
(Flashes (Flashes
in red) in red)
Both indicators
flash
If the indicators flash in a manner other than described above, unplug the AC power cord and
make sure the ON/STANDBY indicator turns off, then plug the AC power cord into the wall
outlet and turn on the projector.
If the problem still persists, consult with qualified Sony personnel.
The number of Meaning
flashes
Twice The temperature in
the projector is
abnormal.
If there is any problem or an error message appears on the
screen, refer to "Messages List" or "Troubleshooting" in
the Operating Instructions contained in the supplied CD-
ROM.
Remedies
• Check if the air filter is
clogged, then clean or
replace it (page 22).
• Check if the ventilation
holes (intake/exhaust) are
not blocked by the wall or
an object and secure a
sufficient gap.
• Check the ambient
temperature and use the
projector within the range
of operating temperature.
Indicators
19
GB