Sonoro PRIMUS SO-341 Bedienungsanleitung Seite 68

1. When the "Setup Wizard" is displayed, press
(or rotate the navigation knob) to select "YES" and then press OK to start the
setup.
2. You are then prompted to select:
• Time format (12 or 24-hour),
• Source of time & date auto update (Update from Radio, Internet or no update).
Depending on the selection you have made, follow the instructions on the
display to further set up date and time, time zone, daylight saving or wireless
network. Rotate the navigation knob on PRIMUS or press the navigation
buttons on the remote control to make selections and then press OK to
confirm (see chapter "Using the menus").
If update from Internet is selected, a Wi-Fi connection must be established.
When entering the key of your wireless network, rotate the navigation knob
on PRIMUS or press the navigation buttons on the remote control to select a
character and then press OK to confirm. To delete the last entry, select [BKSP].
To cancel entering the key, select [CANCEL]. To confirm the entered key, select
[OK].
3. When "Setup wizard completed" appears, press OK to exit the setup wizard.
To run the setup wizard again, go to [System Settings] and then select
[Setup Wizard] (See chapter "System Settings").
68
or on the remote control
© sonoro audio GmbH 2022