13 AUX In 2 mode
13.1
Operation
Your external player (e.g., mp3 player) must be connected to the auxiliary input jack
2 of PRIMUS with an audio cable (withRCA connector, not supplied).
To access the AUX In 2
mode
To start and control
playback
To mute or restore the
sound output
13.2
Setup menu
Press SETUP in AUX In 2 mode to access the setup menu (see chapter "Using the
menus"). The following options are available and the current settings (if applicable)
are marked with an asterisk (*).
•
[Bluetooth headphone]
To connect or disconnect to Bluetooth headphones, see chapter "Basic
operation".
•
[System Settings]
See chapter "System Settings".
•
[Main menu]
To access other playback modes, alarm or sleep timer.
© sonoro audio GmbH 2022
Press AUX key on PRIMUS to toggle AUX In 2 mode.
Or, press
key on the remote control.
Or, press MENU once, then
navigation knob) to select the AUX In 2 mode and then
press OK to confirm.
Perform all playback operations on the external player.
Press
or
button.
or
(or rotate the
GB
87