Inhaltsverzeichnis
Werbung
1 .0 I N T RO D u C T I O N
congratulations with your new DALI SPEKtOr loudspeaker. It is important to us that your new
DALI loudspeakers are set up and connected optimally. for this reason, we recommend that you
read this manual and follow its recommendations. the manual contains instructions for setup
and connection, as well as tips and advice on how to get the most out of your new loudspeakers.
DALI is acclaimed around the world for unique loudspeakers built to our uncompromising
standards for design and performance. the goal for every single DALI loudspeaker is always
our foremost commitment: to create a listening experience in your home that will make you
forget time and place.
remember to sign up for the DALI newsletter at www.dali-speakers.com.
Enjoy!
2.0 u N PAC K I N G
Be careful not to damage the contents when you unpack the parts. Depending on which DALI
SPEKtOr model you have bought, different accessories come with the loudspeaker. check that
all parts are contained in the cardboard box (see table 1). Keep the packaging materials should
your speaker need to be relocated or serviced.
3.0 P O S I T I O N I N G
to achieve the best results, the loudspeaker setup should be symmetrical round your favorite
listening position, see figure 1A - c. We recommend that you experiment with the position of
your loudspeakers – the sound quality will change depending on the loudspeaker position.
for SPEKtOr 1, SPEKtOr 2, and SPEKtOr VOKAL, the speakers should ideally be positioned,
so that the height of the tweeter is approximately at ear height when seated in your favorite
listening position.
SPEKtOr 6 are designed as floor standing speakers. they should be positioned minimum 10 –
20 cm (4 – 8") from the rear wall.
Objects positioned between the speaker and the listening position might negatively affect sound
quality. the speakers are designed to meet our wide dispersion principle, so they should NOt be
angled towards the listening position, but be positioned parallel with the rear wall, see figure 2.
By parallel positioning, the distortion in the main listening area will be lowered and the room
integration will be improved. the wide dispersion principle will ensure that sound is spread
evenly within a large area in the listening room.
3.1 DALI SPEKTOR 1 & 2
the speaker can be positioned on a stand/shelf or hung on a wall using the integrated wall
bracket. If positioned on a stand or shelf, the enclosed rubber bumpers can be mounted under
the speaker for stable and vibration free positioning, see figure 3A. If hung on a wall, mount the
bumpers on the rear edges of the speakers, see figure 3B. the speakers are hung on a wall
using one screw mounted in the wall. the screw must fit the wall bracket on the rear side of
the speaker, see figure 3B.
8
Werbung
Inhaltsverzeichnis
