pro user DRC5040 Bedienungsanleitung Seite 8

POWER ON / OFF BUTTON
Press to power on /turn o display. The display will be turn on by pressing the button. Long
press for 3 second to shut down.
PARKING GUIDELINES DISPLAY /BACK BUTTON
Go back one level inside the menu control. Press to show Parking guideline . Press for 3
seconds until it starts flashing, use UP/DOWN button to adjust parking guideline display and
then press Enter button to confirm.
ENTER BUTTON
Press to confirm selection inside the menu control.
DOWN BUTTON
Moving down for selection inside the menu control.
UP/CHANNELS SWITCHING BUTTON
Moving up for selection inside the menu control. Switching between channel 1 & 2.
MENU BUTTON
Press the Menu button to enter the menu screen as shown below: pairing, display & system
info.
Pairing Pairing
Pairing Pairing
Select the "Pairing" icon with the arrow buttons and press the Power button.
Shortly after please press the rubber button on the bottom of camera until the
signal is well received by the monitor and "OK" appears on the screen. The unit
will work properly and will automatically pair by itself in the future operation.
Press the menu button to exit the selection or it will automatically exit after 30s.
Display Display Display Display
Brightness, contrast, color, rotate settingss. Press Up & Down button to choose .
In this menu you can change brightness, contrast or colour of the picture.
Chose the desired function with the arrow buttons, confirm by pressing the enter
button and change the values with the arrow buttons.
System info System info System info System info
Shows current monitor & camera system software versions.
OPERATION
8