Package Contents; Installation - pro user DRC5040 Bedienungsanleitung

1) Monitor
2) Suction mount for monitor
3) Monitor power cable
4) Camera with mounting plate
5) Mounting Accessories
6) User manual
These instructions do not apply to all vehicles. They are only meant as a general guide These instructions do not apply to all vehicles. They are only meant as a general guide These instructions do not apply to all vehicles. They are only meant as a general guide These instructions do not apply to all vehicles. They are only meant as a general guide
due to the number of di erent makes & models. For vehicle specific questions contact due to the number of di erent makes & models. For vehicle specific questions contact
due to the number of di erent makes & models. For vehicle specific questions contact due to the number of di erent makes & models. For vehicle specific questions contact
your vehicle your vehicle' ' ' ' s manufacturer. s manufacturer.
your vehicle your vehicle s manufacturer. s manufacturer.
Camera installation Camera installation Camera installation Camera installation
There are several ways to mount the camera on the back of your car. But the most
convenient is to mount it near the license plate. Supplied is one mounting plate that can be
fixed behind the license plate, and the mounting plate have been installed in the camera.
The camera itself is screwed on the mounting plate. The camera is tiltable, camera angle can
be adjusted manually on vertical direction.Make sure that its field of view and detection are
not obstructed.
1) Remove the rear license plate, and then loosen the license plate bolts/screws.

PACKAGE CONTENTS

INSTALLATION

3