Answering Machine - AEG Style 15 Startanleitung

10
11.1 Caller display list
This phone automatically stores the last 99 calls received. The calls list is saved even if the mains power
is removed, but new caller information will not be displayed or saved unless the mains power is on.
When the caller display list is full, the new caller display entry will replace the oldest record.
"NEW/CALL" will alternate on the display to show that you have a new caller display call stored in
memory. The alternating "NEW" display will only stop after all new caller display records have been
viewed.
11.2 Viewing the caller display list
With the phone in standby mode, press the caller display button
>The display shows the most recent record. If there are no caller display records, the display will
show "NO CALLS".
>The message icon
Press the up or down
>The display shows "END OF LIST" upon reaching the end of the first and last record.
Press the stop button
11.3 To return a call from the caller's list
When the caller display record is displayed, lift the handset or press the speakerphone button
>The phone automatically dials the displayed record, using the handset or speakerphone mode
selected.
12

ANSWERING MACHINE

An OGM is the announcement callers will hear when the machine answers a call. The phone has two
pre-recorded announcements available if you choose not to record your own OGMs.
OGM1 - this invites callers to leave a message after the tone. The default is "Please leave your
message after the beep".
OGM2 - this informs callers to call later and does not give them the opportunity to leave a message.
The default is "Please call later".
The machine has enough memory to record up to about 20 minutes of messages (including OGMs,
incoming messages and Memos), up to a maximum of 59 messages. When there is no further memory
available to record, it will answer after 15 rings and the machine will announce, "Memory full, please
call later." The display shows "MEMORY FULL" alternating with "XX MESSAGES" and "XX NEW".
Note:
You will need to delete some messages before the answering machine can record any further
messages.
12.1 To play the current OGM
Make sure the machine is switched on.
Press the OGM button
>The display shows "PLAY OGM", and plays the current announcement.
12.2 To record OGM 1
Make sure the answering machine is turned on.
will be on if the caller has recorded a message on the answering machine.
button to scroll to the next caller display record.
to return to standby mode or wait until the unit times out.
.
.
.