Spare Parts And Accessories; Disposal Information; Declaration Of Conformity - Flex VC 2 L MC Hip 18.0-EC Originalbetriebsanleitung

Spare parts and accessories

Other accessories can be found in the manufacturer's catalogues.
Exploded drawings and sparepart lists can be found on our
homepage: www.flex-tools.com
Item
Shoulder strap
Filter bag FS-F (VE5)
Filter element FE-HEPA

Disposal information

WARNING!
Render redundant power tools unusable by removing the
power cord.
EU countries only
Do not throw electric power tools into the household
waste!
In accordance with the European Directive 2012/19/EU on
Waste Electrical and Electronic Equipment and transposition
into national law used electric power tools must be collected
separately and recycled in an environmentally friendly manner.
NOTE
Please ask your dealer about disposal options!

Declaration of Conformity

We hereby declare that the product described on page 6 corres-
ponds with the following standards or normative documents:
EN 60335-1:2012+A11:2014+A13:2017+1:2019+
A2:2019+A14:2019
EN 60335-2-69:2012
EN 62233:2008
EN 55014-1:2017+A11:2020
EN 55014-2:2015, in accordance with the provisions of the
directives 2014/30/EU, 2006/42/EG, 2011/65/EG, 2014/53/EU.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
09.01.2023
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
14
We as the manufacturer: FLEX Elektrowerkzeuge GmbH,
Business address: Bahnhofstr. 15,
Part number
71711 Steinheim, Germany
declare under our sole responsibility, that the product(s)
530.572
described under „Technical specifications" fulfills all the
530.573
relevant provisions of The Supply of Machinery (Safety)
Regulations S.I. 2008/1597 and also fulfills all the relevant
530.616
provisions of the following UK Regulations:
Electromagnetic Compatibility Regulations S.I. 2016/1091,
The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
Regulations S.I. 2012/3032 and are manufactured in
accordance with the following designated Standards:
BS EN 60335-1+A15:2012, BS EN 60335-2-69:2013,
BS EN 62233:2008, BS EN 55014-1:2017,
BS EN 55014-2:2015
Place of declaration: Steinheim, Germany.
Responsible person: Peter Lameli, Technical
Director – FLEX-Elektrowerkzeuge GmbH
Contact details for Great Britain:
FLEX Power Tools Limited,
Unit 8 Anglo Office Park, Lincoln Road,
HP 12, 3RH Buckinghamshire,
United Kingdom.
09.01.2023
Declaration of Conformity
VC 2 L MC Hip 18.0-EC