AL-KO HWA 1300 F Bedienungsanleitung Seite 14

•
If the pump runs trouble-free, put it into
operation as described in the instructions.
Removing and mounting of non-return
valve, cleaning (HWA 1300 F)
•
Remove the filter (see Section "cleaning the
filter").
•
Unscrew the non-return valve (21) and clean
it under flowing water.
•
Renew seal (22) if necessary.
•
Install the non-return valve.
•
Install the filter and filter cover.
Frost protection
Disposal
Do not dispose of worn-out units through the household garbage!
The appliance, its packaging and accessories are all produced from recyclable
materials and must be disposed of accordingly.
RL 2002/96 EG
GB 5
All manuals and user guides at all-guides.com
Your domestic water system is susceptible to low
temperatures. Make sure to empty the device of
residual liquid (hoses, pump and reservoir) and
store it so that it is protected from frost.
•
•
•
Empty the suction and pressure hoses.
Remove the draining screw (6) and (7) (HWA
1300 F) drain all water from the pump cham-
ber.
Replace the draining screw and store the
device so that it is protected from frost.
Translation of original user instructions