Ec Declaration Of Conformity - AL-KO HWA 1300 F Bedienungsanleitung

HWA 1001INOX / 1300F

EC declaration of conformity

We hereby declare that this product, in the form in which it is marketed,
meets the requirements of the harmonised EU guidelines,
EU safety standards, and the product-specific standards.
Product
Domestic water system
Serial number
G3043045
Model
HWA 1001 INOX
HWA 1300F
Sound power level
measured / guaranteed
HWA 1001 INOX 83/86 dB(A)
HWA 1300F 82/83 dB(A)
Warranty
If any material or manufacturing defects are found during the statutory customer protection period, we will either repair or
replace the equipment, whichever we consider the more appropriate. This statutory period may vary according to the legisla-
tion in force in the country where the equipment was purchased.
Our warranty is valid only if:
„ The equipment has been used properly
„ The operating instructions have been followed
„ Genuine replacement parts have been used
The following are not covered by warranty:
„ Paint damage due to normal wear
„ Wear parts identified by a border XXX XXX (X) on the spare parts list
„ Combustion motors – these are covered by a separate warranty from the manufacturer concerned
To make a claim under warranty, please take this statement of warranty and proof of purchase to the nearest authorised
customer service centre. This warranty does not affect the usual statutory rights of the customer relative to the seller.
467359_b
All manuals and user guides at all-guides.com
Manufacturer
AL-KO Geräte GmbH
Ichenhauser Str. 14
89359 KOETZ
DEUTSCHLAND
EU directives
2006/95/EG
2004/108/EG
200/14/EG (13)
Conformity evaluation
2000/14/EG
Appendix V
The warranty is no longer valid if:
„ The equipment has been tampered with
„ Technical modifications have been made
„ The trimmer was not used for its intended purpose (for exa-
mple, used for commercial or communal applications)
┌──────┐
└──────┘
Executive Officer
Anton Eberle
Ichenhauser Str. 14
89359 KOETZ
DEUTSCHLAND
Harmonised standards
EN 60335-1; VDE 0700-1:2007-02
EN 60335-2-41; VDE 0700-41:2004-12
EN 60335-2-41/A2; VDE 0700-41/A2:2009-02
EN 55014-1; VDE 0875-14-1:2007-06
EN 55014-1/A1; VDE 0875-14-1/A1:2008-12
EN 55014-2; VDE 0875-14-2:2009-06
EN 61000-3-2; VDE 0838-2:2006-10
EN 61000-3-2/A1; VDE 0838-2/A1:2007-05
EN 61000-3-2/A7; VDE0838-2/A7:2007-06
EN 61000-3-2/A4; VDE 0838-2/A4:2007-06
EN 61000-3-3; VDE 0838-3:2009-06
Kötz, 2010-07-21
Antonio De Filippo, Managing Director
GB
3