Control Panel - Hisense RT600N4WC2 Bedienungsanleitung

Control panel

Use your appliance according to the
following control regulations, your
appliance has the corresponding
functions and modes as the display
panels showed in the pictures below.
When the appliance is powered on for
the first time, the backlighting of the
icons on display panel starts working. If
no buttons have been pressed and the
doors are closed, the backlighting will
turn off.
Controlling the temperature
We recommend that the temperature
for the refrigerator set 4°C when you
start the appliance for the first time. If
you want to change the temperature,
following the instructions below.
Caution! When you set a temperature,
you set an average temperature for the
whole refrigerator cabinet.
Temperatures inside each
compartment may vary the
temperature value displayed on the
panel, it depends on how much food
stored in and where you place them.
Ambient temperature may also affect
the actual temperature inside the
appliance.
NOTE: High temperature setting will accelerate
food waste.
• For optimum food preservation, a medium
setting is generally the most suitable.
1. Regulating temperature in fridge
Press "temp" to set fridge temperature
between 2°C and 8°C as needed, and
display panel will display
corresponding values according to the
following sequence.
4℃
5℃
2. Mode
You can set two different modes as you
need by pressing the button "Mode" on
the display panel, and the corresponding
icon will be illuminated.
Super Cool
Super Cool mode can make the food
cooling quicker, and keep food fresh for
a longer period.
When the function is activated. The
super cool icon will be illuminated and
the fridge temperature indicate 2°C.
Super cool mode will quit automatically
after 3hours.
When super cool function is on, you can
switch it off by pressing "Mode".
By pressing "Temp", you can also switch
the super cool function off and the
refrigerator temperature setting will
revert back to the previous setting.
Energy saving
Press the "Mode" button to turn on the
Energy saving function, the "Eco" icon
will be illuminated.
When the Energy saving function is on,
the temperature setting of fridge is
changed automatically to 6°C.
When the Energy saving function is on,
you can switch it off by pressing " Mode "
or " TEMP. " button, and the refrigerator
temperature setting will revert back to
the previous setting.
3℃ 2℃
6℃ 8℃
14