BOMANN WA 7192 Bedienungsanleitung, Garantie Seite 38

Inlet filter at the tap
Clean the filter when not enough water is supplied
with opened water valve.
 Unscrew the inlet hose from the water valve.
 Wash the inlet filter under running water. Recon-
nect the inlet hose firmly.
Inlet filter at the appliance
Clean the filter regularly, approximately every one to
three months.
 Unscrew the inlet hose from the appliance back.
 Clean the filter with a small brush.
 Reconnect the inlet hose firmly.
Cleaning the filter of drain pump
CAUTION:
The appliance must never be used without the filter.
The foreign object trap in the drain pump prevents
rinsed-out parts from blocking the drain pump sys-
tem. Clean the pump regularly, approx. once a
month; depending on use.
 Open the maintenance cover in the base of the
unit. Caution! For this, the use of a tool could be
necessary.
 Place a drip tray under to catch possible leaking
water.
 Turn the cap counterclockwise. Look for leaking
water! Turn the filter not completely out!
 Interrupt the water flow by turning the filter clock-
wise again.
 If the draining process is completed, turn out the
filter completely.
 Take off the filter and remove any dirt and foreign
objects.
 Insert the cap again and make sure it is tightened
well and no water can escape.
 Close the maintenance cover.
Freezing protection
If the appliance is out of operation and exposed to
temperatures below zero, observe the following
measures:
 Disconnect the unit from the power supply.
 Close the water supply and remove the inlet hose
from the water valve.
 Drain the water from the supply hose and from the
water valve.
 Reconnect the supply hose to the water valve.
38