BOMANN WA 7192 Bedienungsanleitung, Garantie Seite 32

 Fold the divider down when using liquid deter-
gent.
 Fold up the divider when using washing powder.
Foam detection
Excessive foam forms when too much detergent is
used. This affects the wash and rinse cycle. The
function automatically checks foaming; excessive
foam is removed by an extra rinse and spin cycle.
Control panel / Functional description
NOTE:
Note that the settings, functions and additional options are program-dependent!
1 Program selector switch
To select a wash program, turn the program selector
switch to the appropriate position. For details about
the programs, see the
Off-Position
To switch the appliance off, turn the program selector
switch back to the off position.
2 Washing temperature
Press the button repeatedly to set the desired wash-
ing temperature.
20→30→40→50→60→90↩
↪ (cold)→
"Program table"
.
Fill in the laundry
 Unravel the clothes before putting them into the
machine.
 Each load should correspond to the nominal ca-
pacity of the appliance. Do not overload the appli-
ance. Different strengths, sizes and types of laun-
dry can affect the actual loading capacity. It is ad-
visable to load the appliance just that a normal
circulation during washing is possible.
 Make sure that no laundries are caught between
the appliance door.
3 Spin speed
Press the button repeatedly to select the speed for
the spin cycle.
↪1400→1200→1000→800→600→400→100→0 (Spin
stop)↩
4 Start delay
The program start can be delayed about
by repeatedly pressing the button. Select and start a
program, the device starts automatically after the
selected time has elapsed.
2:00→3:00→4:00→5:00→6:00→.....→24:00↩
↪1:00→
32
1 – 24 hours